Anti-Corrosion Flat Drip Tape Production Line-manufacture,factory,supplier from China

(Total 24 Products for Anti-Corrosion Flat Drip Tape Production Line)
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contact Now
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contact Now
Convenient and fastThe prepunching outlet water belt adopts a modular design, which is simple and convenient to install.
  Contact Now
UHMWPE is often described as the world’s toughest polymer.
  Contact Now
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  Contact Now
HDPE Pipe Production lineHDPE pipe extrusion line is developed by HUAYA based on European advanced technology and R&D experience of the plastic machinery for many years.
  Contact Now
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contact Now
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contact Now
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contact Now
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contact Now
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contact Now
Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contact Now
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contact Now
PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.
  Contact Now
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contact Now
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contact Now
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contact Now
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contact Now
To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.
  Contact Now
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
Relate News
HWYAA Company Earns Acclaim from Turkish Clients on January 4th Visit, Impressed by Fully Automated Flat Drip Tape Production Line and Woven Microspray Tape Manufacturing Line; Commends State-of-the-art Automatic Winding and Packaging System.
1.the use of exquisite,excessive tensile-electricity pe uncooked cloth;2.it's far non-poisonous,odorless,anti-ageing,light-weight and long serivce life;3.holes clean and frivolously,have good resistance to jam;4.according to exceptional crops,choosing diferent holes design,sprary impact is right;Five.usingcooperatively with agricultural pumps and occasional strain water pipelines use,saving time and saving water;6.reference to the multi-fountion price,it's miles loose to adjust spraying width,top and vicinity through adjusting the water stress;7.
On October 20, we received two groups of customers. One group was from Turkey who came to view our new technology production line of prefabricated hole flat-laid water hoses. The other group was from Algeria who came to see our strip drip irrigation tape production line. Recently, our one-step prefabricated hole water hose has received extensive attention from domestic and foreign customers. At present, our company's technology is leading in China, and the entire production line is independently developed and produced, ensuring the compatibility and smoothness of the equipment.
On August 9, 2024, our factory welcomed distinguished customers from Algeria who came specially to visit our factory's strip drip irrigation tape production line.The strip drip irrigation tape production line is one of the core production facilities of our factory, which has attracted much attention for its efficient, precise and high-quality production capacity.During the visit, our professional staff introduced the production process, technical characteristics and strict quality control system of the production line to the customers in detail.
On August 20, 2024, Jordanian customers came to Huaya factory to visit the strip drip irrigation tape production line. During the visit, the customers paid special attention to and showed great interest in our strip punching detection link.The strip punching detection of the strip drip irrigation tape production line is a key step to ensure product quality.
On August 1, 2023, Saudi Arabian clients officially visited our factory to observe the fully automated winding and packaging production line for flat drip irrigation tape. Both parties engaged in in-depth communication and discussions, and the clients expressed their satisfaction with our company's technological strength and craftsmanship. This collaboration further enhances our influence in the international market. We look forward to further cooperation with our Saudi Arabian clients!Laiwu Huaya Polymer Sci.&Tech. Co., Ltd.
It is a new type of porogen to produce HDPE with prestressed corrugated pipe as raw material. Used in important tensioned prestressed concrete structures, rod insertion holes, good sealing performance, no leakage, ring stiffness, friction parameters, anti-aging, electrical corrosion, good elasticity and softness, not easy to break and gouge and build new connections Way, the connection way is more convenient.
The grand event of the plastics and rubber industry - PLASTICS & RUBBER INDONESIA 2024 is about to kick off.Exhibition Venue: Jakarta International Expo (located in Kemayoran).Exhibition Time: From November 20th to 22nd, 2024 (10:00 - 18:00 Western Indonesia Time); November 23rd, 2024 (10:00 - 17:00 Western Indonesia Time).Booth Number: A - 3328.At this exhibition, we will display our new products - the inlaid strip dripper drip irrigation tape (T-tape) production line and the prefabricated hole irrigation main belt equipment production line.
We tested a flat drip irrigation pipe production line successfully for our customer from Uzbekistan. The production speed of this line is 120/min . All PLC and servo adopts Siemens brand . So the production line is very stable . Huaya- the most professional manufacturer of drip irrigation pipe production lines . If you have any questions , pls feel free to contact us .Doubel station haul off ,punching device and inspector with alarm systemDoube station coiling machine ,automatic cut ,automatic change rolles
The correct use of the PVC pipe production line can avoid threats to the personal safety of the operators and avoid equipment problems, so that the PVC pipe production line can be better used and bring greater benefits to users.PVC pipe production line In the factory, the PVC pipe production line must be operated by personnel familiar with the equipment in accordance with the prescribed procedures when installing, debugging (setting the mold, adjusting the blade gap) or disassembling the mold. Always check the sharpness of the mold blade and knife edge.
Pipe production equipment is a production line that produces pipe materials. The following editor introduces how to deal with the failure of the pipeline equipment production line:The pipe production equipment is not covered tightly, and the outer glue is not tightly wrapped.Countermeasures: a make the surface of the pipe have glue, and the vacuum of the glue is good; b increase the temperature of the aluminum strip and turn on the flat tube heating gun;2.
Do you know how to install drip tape correctly? Let’s take a look with the editor today!1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch. Water vapor is generated in the mulch to form a lens effect.2. When installing, the staff should carefully read the installation instructions of each component, and connect each component according to the correct installation method.3.