Black Pp/Pe/Pvc Round Emitter Drip Irrigation Pipe Extruder-manufacture,factory,supplier from China

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.

The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of

1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.

The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.

As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.

Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l

The extrusion line is newly developed based on European technique and systemic study and research of new type pipe production line; It’s suitable for PE,PP and other polyolefine pipes high-speed extrusion.

The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.

Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.

product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.

PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).

The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu

Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l

Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.

1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.

Product Description:New generation UHMWPE pipe extrusion line uses patented equipments and technology of Huaya company, relizescontinuous extrusion of pipes.

To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.