blown film equipment manufacturers-manufacture,factory,supplier from China

(Total 24 Products for blown film equipment manufacturers)
Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.
  Contact Now
Two-layer co-extrusion blown film line by two single screw extruder, two layer co-extrusion blown film die head, cooling system, tractor, winder and temperature and electric control system, mainly used in open width 2000-2800mmtwo-layer co-extrusion mulch film. NO.ItemNumber1Extruder SJ-55/30  22Manual fast change filter device23Two layers co-extrusion dieφ33014Cooling system15Steady bubble device16Upper-driving device17Flattening board18Traction frame and guide roller group19Secondary traction device110Double station back to back friction winder1 Agricultural Plastic Greenhouse
  Contact Now
Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.
  Contact Now
This machine is mainly used to produce three-layer composite plastic wide-width impermeable film and geomembrane.
  Contact Now
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  Contact Now
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contact Now
Product Application:This product is mainly used for mine escape pipes, fly ash transportation, marine dredging pipes, etc.Supply Ability:10 Set/Sets per Month UHMWPE Pipe Extrusion Mahcine LinePackaging Details:Usually we use a wrapping film to wrap the machine, then fix the machine with a wire rope, or use wood packaging according to your needs.Technical Parameters:Extruder modelSJ-75/20SJ-90/20SJ-150/20SJ-200/20SJ-240/20Pipe OD range40-89mm90-159mm160-500mm500-800mm800-1200mmMotor power15Kw18.5Kw30Kw55Kw75KwOutput(kg/h)Bracket lengthAccording by clients needTotal power<30<45<65<8
  Contact Now
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contact Now
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contact Now
Strip Type Drip Irrigation Pipe Making Machine is a new generation of high-speed and thin wall drip irrigation pipe equipment developed by our company based on the advantages of domestic and foreign equipment combined with our company's technology.Product Feature of  drip irrigation tape extrusion machine :1. The diameter of tape is controlled by diameter- control device so that the measurement and control of diameter of tape is accurate, steady and the main machine motor, shaping part and tractor all adopt frequency reliable. 2.
  Contact Now
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  Contact Now
PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.
  Contact Now
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contact Now
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contact Now
Product Description:New generation UHMWPE pipe extrusion line uses patented equipments and technology of Huaya company, relizescontinuous extrusion of pipes.
  Contact Now
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contact Now
1.    Product introductionThrough a meticulous production process, we unfold and fold the raw material of the woven tape or belt, and after undergoing the heat sealing treatment, it transforms into a sturdy strip-like structure. Subsequently, we utilize laser technology to perforate the tape or belt, ensuring that the micro-jet holes are evenly distributed across the entire strip.Upon completion of the perforation process, we rinse and cool the tape or belt to stabilize its structure and dimensions.
  Contact Now
1、Technical Data:numberprojectHigh speed line AStandard line B1Dropper belt diameterΦ 16 - Φ 20 mmΦ 16 - Φ 20 mm2Wall thickness0.15 0.60 mm0.15 0.60 mm3Single screw extruderSJ--75/32SJ--65/324Designed rate of production200m/min(300mm spacing)120m/min(300mm spacing)5Center line height1000mm1000mm6Dropper screening speed600 PCS per minute400 PCS per minute7Drop spacing100mm—1500mm200mm—1500mm8Drilling rate600 PCS /min400 PCS /min9Punching modeHigh speed motorHigh speed motor10Dropper tape length per roll500m—1000m500m—1000m11Total installed capacity102Kw84Kw12Maximum extrusion180Kg120Kg13Electri
  Contact Now
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contact Now
HDPE Pipe Production lineHDPE pipe extrusion line is developed by HUAYA based on European advanced technology and R&D experience of the plastic machinery for many years.
  Contact Now
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
Production line of new generation of UHMWPE wearing resistance pipeProduction line of new generation of UHMWPE wearing resistance pipe uses patented equipmentand technology of Huaya Company, realizes continuous extrusion of pipe products, in comparison with same machine of other units, and has following features: ① Pipe output can increase over 1/3; ② Comprehensive energy consumption reduce over 1/4; ③ Comprehensive quality of pipe products improves greatly.UHMWPE pipe is widely used in feeding various powder, liquid and gas, for example various fields such as treatmen
  Contact Now
The line achieves continuous extrusion of pipes, If changing the auxiliary machine, can produce rod, board, etc.The line adopts special-purpose extruders of UHMWPE: the super large torque reduction box, special designed screw, new type slotted cylinder, forming mold, cutting machine, bracket, etc. UHMWPE has nice integrity that ordinary polyethylene and other project plastics can not compared, it has the best anti-abrasive, anti-stroke, anti-chemical corruption, anti-low temperature and anti-aging, so it is called “an amazing plastic”. Huaya Co, Ltd, on the base of developing UHMWPE
  Contact Now
Relate News
As an important filler, calcium carbonate has been widely used in the processing and production of PVC pipes. However, PVC produced by many manufacturers has varying degrees of yellowing and brittleness. The alkalinity of calcium carbonate has a great influence on the brittleness and yellowing of PVC pipe production equipment, which is ignored by many manufacturers. Industrial calcium carbonate precipitation alkalinity is actually the free alkali produced during the production process.
In today's society, when people think of packaging, they first think of various packaging bags, boxes and other packaging materials that can be found in supermarkets, pharmacies, and convenience stores. I don't know whether all kinds of large-scale machinery and equipment in the industry also need packaging during transportation.In the face of large-scale machinery and equipment commonly seen in the market, traditional packaging is obviously powerless, but among many flexible packaging materials, packaging film equipment can be used to package large-scale machinery and equipment.
Since the 1980s, China has introduced thousands of different types of PVC pipe extrusion production lines, and large pipe manufacturers such as Dalian Shide, Zhejiang Yonggao, and Shanghai Tomson have emerged. At present, there are more than 600 manufacturers of uninterruptible power supply (rigid PVC) pipes and fittings in China, with a total production capacity of more than 1.1 million tons per year. There are more than 30 manufacturers with a production scale of more than 10,000 tons/year, and more than 60 manufacturers with a scale of 5,000-10,000 tons/year.
Packaging film equipment is a kind of winding machine, which is mainly used on production lines. It is mainly used to wind the production line. It is unmanned. The packaging film equipment will have some common faults during operation. Let me introduce you in detail below.1. After the equipment is installed, it does not work when it is started. First, check the internal and external power supplies, and then check whether the PLC and inverter in the operation panel and the electric control cabinet are energized.
As a plastic machinery manufacturer, HWYAA is committed to providing high-quality blown film machines, fully automatic irrigation pipe production lines, and solutions to meet customer needs. In the past year, we have achieved proud accomplishments, launching advanced equipment and gaining recognition from our customers. Looking ahead, we will continue to innovate and improve, delivering high-quality products and services to our customers.Wishing everyone a healthy, happy, and successful New Year!HWYAA Plastic Machinery
Operation method of packaging film equipment:1. Before starting, check the heat shrinkable channel for foreign matter, and remove the foreign matter; the oil level of the reducer should be between the upper and lower lines of the observation mirror, and the oil level should not be sufficient. Turn on the main power switch, turn on the start power switch, and the green indicator light is on.2. Turn on the conveyor belt control switch, start the fan, and the equipment is running.
How to reduce the energy consumption of the extruder? PVC pipe production equipment manufacturers believe that it is necessary to carefully analyze the energy consumption of the extruder: the energy consumption of the extruder refers to the electric energy consumed by a unit mass of plastic product below kwh/kg. According to the input and output, the energy consumption of the extruder can be divided into two types: 1. 77% of the energy input is driven by energy motors and related components, 22.8% of the barrel, head and cooling input are driven by external equipment, and 0.2% about.
The correct use of plastic pipe production equipment can avoid danger to operators and avoid equipment problems, so that plastic pipe production equipment can be better used and bring greater benefits to users.When installing, debugging (aligning the mold, adjusting the blade gap) or disassembling the mold of the plastic pipe production equipment, a person who is familiar with the equipment needs to operate according to the prescribed procedures. The sharpness of the mold blade and knife edge should be checked frequently.
1. To remove the modified cylinder part from the original heater ring. 2. Measure the size of the cylinder, usually including the length of the circumference, calculate the need for insulating wadding, and after the initial estimation of the heating coil power, the position of the winding  is sufficient. 3.Wrap the insulating pad around the cylinder and tie it tightly with a heat-resistant bandage so that the thickness of the insulating pad is about 1.5-2.0cm.
On August 19, 2024, HWYAA company successfully shipped an ultra-high equipment for a domestic customer. The ultra-high equipment shipped this time is the result of careful research and development and manufacturing by the company's technical team, representing the company's advanced level in related fields. This equipment has many advantages such as high efficiency, stability, and reliability, and will provide strong support for the customer's production and operation.HWYAA has always been committed to providing high-quality products and services for customers.
There are many kinds of plastic pipe materials, so they are widely used in various gas and liquid transportation projects. The equipment for the production of plastic pipes for pipes is shouldering a big mission. In order to ensure the production power and the output of pipe raw materials, the operators must do a good job of daily maintenance.The first thing in daily maintenance of ultra-high polymer pipe equipment is cleaning.
HWYYA has attracted a lot of attention from the industry by showcasing innovative water-saving irrigation and plumbing equipment at Plastics Saudi Arabia 2023 in Riyadh. The water-saving drip irrigation and piping equipment enables efficient water use and reduces waste.