drip irrigation machinery manufacturers-manufacture,factory,supplier from China

(Total 24 Products for drip irrigation machinery manufacturers)
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
HDPE Pipe Production lineHDPE pipe extrusion line is developed by HUAYA based on European advanced technology and R&D experience of the plastic machinery for many years.
  Contact Now
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contact Now
According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.
  Contact Now
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contact Now
To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.
  Contact Now
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contact Now
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contact Now
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contact Now
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contact Now
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contact Now
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contact Now
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contact Now
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contact Now
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contact Now
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contact Now
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  Contact Now
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contact Now
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contact Now
Relate News
During China's National Day holidays, HWYAA Plastic Machinery Company held a team-building event which included athletic games and team challenges, boosting team spirit and ties among employees. The highlight was a delicious meal with roast lamb and fish soup, deepening friendships and enhancing unity. Participants showcased their talents especially in singing, creating a lively atmosphere. The event reminded the team of their shared goal: to continue innovating in the plastics machinery industry. After the holiday, employees returned to work more energized and cohesive than before.
Dear customers:You are cordially invited to visit our booth at the upcoming Plast Eurasia istanbul 2023 exhibition in  Istanbul, Turkey from November 22-25, 2023. We are eager to meet you and showcase our latest solutions. Booth Number: 11A 123EManufacturer Country: ChinaVenue: Tuyap Fair Convention and Congress CenterIstanbul, Turkey Thank you for your continued support! HWYAA plastic machinery 
As an important filler, calcium carbonate has been widely used in the processing and production of PVC pipes. However, PVC produced by many manufacturers has varying degrees of yellowing and brittleness. The alkalinity of calcium carbonate has a great influence on the brittleness and yellowing of PVC pipe production equipment, which is ignored by many manufacturers. Industrial calcium carbonate precipitation alkalinity is actually the free alkali produced during the production process.
Since the 1980s, China has introduced thousands of different types of PVC pipe extrusion production lines, and large pipe manufacturers such as Dalian Shide, Zhejiang Yonggao, and Shanghai Tomson have emerged. At present, there are more than 600 manufacturers of uninterruptible power supply (rigid PVC) pipes and fittings in China, with a total production capacity of more than 1.1 million tons per year. There are more than 30 manufacturers with a production scale of more than 10,000 tons/year, and more than 60 manufacturers with a scale of 5,000-10,000 tons/year.
Dear Customer,You are cordially invited to visit our booth at the upcoming Plast Imagen exhibition in Mexico City from November 7th to 10th, 2023. Our booth, number 3722, will be located in Hall A of the Citibanamex Center. We are eager to meet you and showcase our latest solutions.Thank you for your continued support!Booth Number: Hall A 3722Location: Citibanamex Center, Mexico CityManufacturer Country: ChinaShaping the Future of Plastics!Best regards,HWYAA Plastic Machinery
As a plastic machinery manufacturer, HWYAA is committed to providing high-quality blown film machines, fully automatic irrigation pipe production lines, and solutions to meet customer needs. In the past year, we have achieved proud accomplishments, launching advanced equipment and gaining recognition from our customers. Looking ahead, we will continue to innovate and improve, delivering high-quality products and services to our customers.Wishing everyone a healthy, happy, and successful New Year!HWYAA Plastic Machinery
In today's society, when people think of packaging, they first think of various packaging bags, boxes and other packaging materials that can be found in supermarkets, pharmacies, and convenience stores. I don't know whether all kinds of large-scale machinery and equipment in the industry also need packaging during transportation.In the face of large-scale machinery and equipment commonly seen in the market, traditional packaging is obviously powerless, but among many flexible packaging materials, packaging film equipment can be used to package large-scale machinery and equipment.
On July 29, 2024, HWYAA plastic machinery welcomed Brazilian customers to visit the falt drip irrigation tape making machine. HWYAA Plastic Machinery is renowned for its advanced technology and excellent quality. This visit demonstrated the attention from the international market. During the visit, professional technicians elaborated on the production line process, technical advantages, and quality control system.
How to reduce the energy consumption of the extruder? PVC pipe production equipment manufacturers believe that it is necessary to carefully analyze the energy consumption of the extruder: the energy consumption of the extruder refers to the electric energy consumed by a unit mass of plastic product below kwh/kg. According to the input and output, the energy consumption of the extruder can be divided into two types: 1. 77% of the energy input is driven by energy motors and related components, 22.8% of the barrel, head and cooling input are driven by external equipment, and 0.2% about.
Water-saving irrigation refers to irrigating the largest area of crops with the minimum amount of water, so as to achieve the purpose of increasing agricultural output and income from agricultural planting. At present, there are many water-saving irrigation methods, such as furrow irrigation, sprinkler irrigation and drip irrigation, which can not only greatly improve the utilization rate of water resources, but also save agricultural planting time and cost.
It is understood that Jining City is currently in short supply of water resources. In recent years, the city's annual water consumption has reached 4.6 billion cubic meters, with a per capita water consumption of 558 cubic meters, which is lower than 25% of the national average. It is an area with severe water shortage.
We tested a flat drip irrigation pipe production line successfully for our customer from Uzbekistan. The production speed of this line is 120/min . All PLC and servo adopts Siemens brand . So the production line is very stable . Huaya- the most professional manufacturer of drip irrigation pipe production lines . If you have any questions , pls feel free to contact us .Doubel station haul off ,punching device and inspector with alarm systemDoube station coiling machine ,automatic cut ,automatic change rolles