how to operate blown film machine-manufacture,factory,supplier from China

Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.

Two-layer co-extrusion blown film line by two single screw extruder, two layer co-extrusion blown film die head, cooling system, tractor, winder and temperature and electric control system, mainly used in open width 2000-2800mmtwo-layer co-extrusion mulch film. NO.ItemNumber1Extruder SJ-55/30  22Manual fast change filter device23Two layers co-extrusion dieφ33014Cooling system15Steady bubble device16Upper-driving device17Flattening board18Traction frame and guide roller group19Secondary traction device110Double station back to back friction winder1 Agricultural Plastic Greenhouse

Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.

This machine is mainly used to produce three-layer composite plastic wide-width impermeable film and geomembrane.

As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.

Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.

Product Application:This product is mainly used for mine escape pipes, fly ash transportation, marine dredging pipes, etc.Supply Ability:10 Set/Sets per Month UHMWPE Pipe Extrusion Mahcine LinePackaging Details:Usually we use a wrapping film to wrap the machine, then fix the machine with a wire rope, or use wood packaging according to your needs.Technical Parameters:Extruder modelSJ-75/20SJ-90/20SJ-150/20SJ-200/20SJ-240/20Pipe OD range40-89mm90-159mm160-500mm500-800mm800-1200mmMotor power15Kw18.5Kw30Kw55Kw75KwOutput(kg/h)Bracket lengthAccording by clients needTotal power<30<45<65<8

Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.

main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.

According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.

product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.

With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.

1, Very high wear resistance. One of the most remarkable properties of UHMWPE is its extremely high wear resistance, which is very valuable in many engineering applications. In all plastics, the wear resistance is best, which is better than regular grinding of many metal materials (such as carbon steel, stainless steel, bronze, etc.). As the molecular weight increases, the wear resistance of the material also increases.2, High impact resistance. The impact strength of uhmwpe is related to its molecular weight.

Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.

The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu

Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING

Pipe ApplicationsMine industry.Tailings and mud transport, underground filling pipeline.Coal industry.Coal mine  gas pipe, water supply and drain pipe, ventilation pipes, grouting pipe, slime water in coal washer plant, coal slurry pipelines.Sea or lake salt chemical industry.Sea salt, brine transport pipeline.Thermal power.Fly coal ash, chemical water, recycled water transport pipeline.Petrochemical.Corrosive medium or crude oil pipeline.Food processing.Water and material delivery pipeline.River dredging.Dredging, pumping sands conveying pipe.Public utilities.Sewage discharge, water supp

Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.

To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.

Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre