Quick drip installation machine-manufacture,factory,supplier from China

(Total 24 Products for Quick drip installation machine)
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contact Now
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contact Now
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contact Now
Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING
  Contact Now
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contact Now
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contact Now
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contact Now
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contact Now
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contact Now
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contact Now
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contact Now
Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.
  Contact Now
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contact Now
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contact Now
As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.
  Contact Now
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contact Now
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contact Now
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contact Now
Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.
  Contact Now
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contact Now
Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.
  Contact Now
Relate News
Do you know how to install drip tape correctly? Let’s take a look with the editor today!1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch. Water vapor is generated in the mulch to form a lens effect.2. When installing, the staff should carefully read the installation instructions of each component, and connect each component according to the correct installation method.3.
I believe that many of my friends have heard of drip irrigation tapes and water-saving irrigation equipment, and want to try whether they are good or not, but if you want to play an ideal use effect, you must first learn the correct installation method, so today I will follow Let's learn about the correct installation method of drip tape.1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch.
During the period from December 4th to 7th, HWYAA's fourth-generation strip-attached drip irrigation tape manufacturing machine and one-step formed prefabricated hole flat hose manufacturing machine, developed this year, made a remarkable appearance and received extensive recognition at PLASTEURASIA 2024. The fourth-generation inlaid strip-attached drip emitter drip irrigation T tape making machine has remarkable advantages.
We had a fantastic time in exhibition of RUPLASTICA 2024 Product advantages:(1) Advanced irrigation production equipment with manpower and speed advantages, and mastery of core tape drip irrigation technology.(2) Focus on customized high-end blow blowing machines with monitoring system and German design.(3) Specialized UHMWPE products production equipment in a niche field with technical expertise.(4) Mature technology for customizable pipe production equipment.Service advantages:(1) Pre-installation services to accelerate customer production use.(2) Provision of production formula an
UHMWPE (ultra-high molecular weight) pipe making machine delivery to Ukraine kyiv .Hope everything will be getting better .
We tested a flat drip irrigation pipe production line successfully for our customer from Uzbekistan. The production speed of this line is 120/min . All PLC and servo adopts Siemens brand . So the production line is very stable . Huaya- the most professional manufacturer of drip irrigation pipe production lines . If you have any questions , pls feel free to contact us .Doubel station haul off ,punching device and inspector with alarm systemDoube station coiling machine ,automatic cut ,automatic change rolles
High put on resistance.It's four-7 instances of metal pipes, 3times of hdpe pipes, four instances of nylon pipes.
The  diameter of the strip is controlled by the diameter management tool to make the measurement and manipulation of the strip diameter accurate and stable, and the main machine motor, the workpiece and the tractor  adopt a reliable frequency.2. Conversion control system and features of easy adjustment, reliable performance, stable working conditions and low wear 3. The extruder body and screw use nitriding alloy materials, which feature high hardness, high water resistance and long service life. 4.
On July 29, 2024, HWYAA plastic machinery welcomed Brazilian customers to visit the falt drip irrigation tape making machine. HWYAA Plastic Machinery is renowned for its advanced technology and excellent quality. This visit demonstrated the attention from the international market. During the visit, professional technicians elaborated on the production line process, technical advantages, and quality control system.
1. To remove the modified cylinder part from the original heater ring. 2. Measure the size of the cylinder, usually including the length of the circumference, calculate the need for insulating wadding, and after the initial estimation of the heating coil power, the position of the winding  is sufficient. 3.Wrap the insulating pad around the cylinder and tie it tightly with a heat-resistant bandage so that the thickness of the insulating pad is about 1.5-2.0cm.
Packaging film equipment is a kind of winding machine, which is mainly used on production lines. It is mainly used to wind the production line. It is unmanned. The packaging film equipment will have some common faults during operation. Let me introduce you in detail below.1. After the equipment is installed, it does not work when it is started. First, check the internal and external power supplies, and then check whether the PLC and inverter in the operation panel and the electric control cabinet are energized.