Good maintenance can bring greater benefits to plastic pipe production equipment

The correct use of plastic pipe production equipment can avoid danger to operators and avoid equipment problems, so that plastic pipe production equipment can be better used and bring greater benefits to users.

When installing, debugging (aligning the mold, adjusting the blade gap) or disassembling the mold of the plastic pipe production equipment, a person who is familiar with the equipment needs to operate according to the prescribed procedures. The sharpness of the mold blade and knife edge should be checked frequently. It is necessary to grind or replace in time, and be sure to stop the operation when changing the mold to avoid danger.

Do not put your hands or body parts between the upper and lower mold bases (blade), and do not put any debris and tools on the workbench to avoid accidents, because the plastic pipe production equipment can be operated by multiple people, so special personnel are required When directing production and operation, you need to be very careful when holding the workpiece and waiting for the sliding block to drop. The gap between the shear blade and the die and the bending radius should be selected according to the thickness of the copper bar (or aluminum bar).

Keep the oil clean and the oil circuit unblocked. Each shift must add lubricating oil to the moving parts of each unit. The electrical and hydraulic components must be flexible in movement and accurate positioning. If abnormalities are found, the operation must be stopped for inspection, in order to extend the PVC The service life of the tube production line generally requires avoiding sunlight and other heat radiation, and avoiding places with excessive humidity, excessive dust or corrosive gas, which may cause corrosion and deterioration of electronic components, resulting in poor contact or short circuits between components, which affects the normal operation of the equipment. run.

The operating procedures are one of the important measures to ensure the production of plastic pipe production equipment. Production personnel need to strictly follow them. When a failure occurs, the operator should pay attention to keeping the site clean, and truthfully explain it to the maintenance personnel before and after the failure to facilitate analysis , Diagnose the cause of the failure, and eliminate the failure in time.