Common failure analysis of packaging film equipment

Packaging film equipment is a kind of winding machine, which is mainly used on production lines. It is mainly used to wind the production line. It is unmanned. The packaging film equipment will have some common faults during operation. Let me introduce you in detail below.

1. After the equipment is installed, it does not work when it is started. First, check the internal and external power supplies, and then check whether the PLC and inverter in the operation panel and the electric control cabinet are energized. Turn on the power switch with the key and close the switch of the power distribution cabinet.

2. To see if the emergency stop switch is pressed, the emergency stop switch should be pressed when the equipment leaves the factory. After the power supply is put on, the emergency stop switch should be pressed, and the start button should be pressed directly to damage the equipment or accidentally injure people.

3. If the turntable of the packaging film equipment keeps rotating and the film holder does not move, check the counting switch.

4. The packaging film equipment start button does not work, see if it is set to online mode, if so, before the goods enter the packaging film equipment, the equipment does not work, you can switch to stand-alone mode and try again.

5. If the inverter displays an overload alarm, check whether the weight of the goods exceeds the rated load, or check whether the power of the winding turntable inverter or the motor is too small. When choosing this model, the customer must have a good communication with the manufacturer.