Do you know how to install drip tape

I believe that many of my friends have heard of drip irrigation tapes and water-saving irrigation equipment, and want to try whether they are good or not, but if you want to play an ideal use effect, you must first learn the correct installation method, so today I will follow Let's learn about the correct installation method of drip tape.

1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch. Water vapor is generated in the mulch to form a lens effect.

2. When installing, the staff should carefully read the installation instructions of each component, and connect each component according to the correct installation method.

3. When laying the drip tape, keep the labyrinth side up and stick it under the film, and do not turn it over or tighten it.

4. Drying, branching, and additional pipelines are installed on the plot. Agricultural machinery and agricultural tools should be strictly scratched to meet the pipeline, avoid external force damage and reduce life.

5. When laying the pulley type machinery, the bearing is placed on the pulley and the rotating frame to ensure that the pulley rotates flexibly, the drip belt cannot be pulled, and the labyrinth is deformed, which affects the amount of drip.

6. When laying, the drip irrigation tape can be shallowly buried to avoid damage to the ground film. It is also possible to spread soil about 1 mm thick on drip irrigation tape or mulch to destroy the formation of the lens and avoid burns.

7. After the installation of the drip irrigation equipment is completed, a special person should be arranged to manage it. Unauthorized dismantling of the valve is strictly prohibited.

8. After the installation of the system, the dripping system should be supplemented immediately to prevent the aging of the pipeline and dripping belt under the sun's ultraviolet radiation.

After reading the points mentioned above, have you learned how to install the drip tape?